气体爆炸物探测器资料
中科盾气体爆炸物探测仪
ZKD-GS20
一、简介
手持式气体爆炸物探测器可用于消防应急救援使用，也可用于化工管道检查。它具有小巧便携、探测灵敏、可测气体种类齐全，以及可搜查范围精细等特点。
安全注意事项
警告:请遵循制造商的测试程序。不要将位于鹅颈管末端的传感器罩子放置热源位置或附近。
一般准则
l 总是在远离测试位置的“干净空气”环境中打开仪表电源，并等待预热完成.
l 检查传感器罩子，确保其牢固连接.
l 禁止将仪表或传感器放在热源位置或附近.
二、技术指标
灵敏度(甲烷)：约50ppm
检测气体(部分列表):
丙酮、乙炔、酒精、氨、苯、丁烷、乙醇、环氧乙烷、汽油、己烷、氢气、甲烷、石脑油、天然气、油漆稀释剂、丙烷、溶剂等等.
报警: 数字浓度显示和音频报警
自动归零: 在预热过程自动置零
操作条件: 0 to 50°C / 20 to 80%RH
电池: 3x1.5V AAA 碱性电池
外箱尺寸：25*16*7.5cm
产品尺寸：宽6*15*36cm(另软管长40cm)
重量：700g
The Zhongke Shield ZKD-GS20 is a handheld gas explosive detector designed for use in emergency firefighting and chemical pipeline inspections. Its compact and portable design makes it a valuable tool for various safety applications, especially in environments where quick and precise gas detection is crucial.
**Key Features:**
- **Portability and Sensitivity:** The detector is lightweight and highly sensitive, making it suitable for on-the-go detection and rapid response scenarios.
- **Broad Gas Detection Range:** Capable of detecting a comprehensive list of gases including acetone, acetylene, alcohol, ammonia, benzene, butane, ethanol, ethylene oxide, gasoline, hexane, hydrogen, methane, naptha, natural gas, paint thinners, propane, and various solvents.
- **Precision in Search Range:** Offers fine search capabilities, allowing users to detect and pinpoint specific gas leaks or concentrations in complex environments.
**Safety Precautions:**
- **Warning:** Always follow the manufacturer's testing procedures. Avoid placing the sensor cap, located at the end of the gooseneck, near or on hot surfaces.
- **General Guidelines:**
- Power on the device in a "clean air" environment away from the testing site and allow it to preheat completely.
- Regularly check the sensor cap to ensure it is securely attached.
- Do not place the instrument or sensor near or on heat sources.
**Technical Specifications:**
- **Sensitivity (Methane):** Approximately 50 ppm.
- **Alarm:** Features digital concentration display and audio alarms to alert users to the presence of hazardous gases.
- **Auto Zero:** Automatically zeros during the preheat process to ensure accuracy.
- **Operating Conditions:** Can operate in temperatures ranging from 0 to 50°C and relative humidity of 20 to 80%.
- **Battery:** Powered by 3x1.5V AAA alkaline batteries, providing durability and easy replacement.
- **External Dimensions:** 25 cm x 16 cm x 7.5 cm.
- **Product Dimensions:** 6 cm x 15 cm x 36 cm with an additional 40 cm flexible hose length.
- **Weight:** 700 g.
The ZKD-GS20 is an essential tool for detecting explosive gases in various industrial, commercial, and emergency contexts, ensuring safety and preventive measures are adequately addressed in potential hazardous gas environments.
